DMXW2201 Bluetooth RS232 adapter for all devices with the RS232 interface can communicate wirelessly via RS232 and Bluetooth devices, the adapter is compact and easy to use, DMXW2201 uses an external antenna, far visual distance up to 100M. This adapter is suitable for point to point wireless transmission applications in a variety of industrial and commercial environments.
I support AT instruction set, the local configuration is simple and convenient
I support the communication mode, the MAC address configuration
* an external antenna, supports up to 100 meters (line of sight) wireless communication distance
You don't need other consoles and software
It is easy to install, easy to use
The TX and RX. RS232 can switch
Baud rate: support 4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps.
* communication distance: 100 meters (video)
* Network: point to point communication
B: TXD, RxD, GND signal, CTS, and RTS
RS-232 interface: DB9- female head
Standard: Bluetooth specification version 2.0+EDR.
Frequency: 2.400 to 2.4835 GHz.
B: 1600/sec 1MHz channel space, frequency hopping
B: GFSK-1 Mbps, DQPSK-2 Mbps modulation, and 8-DPSK-3 Mbps
Transmission power: Max. 18 * dBm (Class 1)
Receiving sensitivity: -86 dBm typical.
B: SMA chip antenna or antenna head + external antenna (optional)
This antenna gain: chip antenna maximum of 1 to 2 dBi
* working voltage: +5 to +6 V DC
Working current: 90 mA.
* working temperature: -20 ~ C ~ +75 ~ C
Unit size: 35 mm (W) x 65 mm (long) x 16 mm (high)
This factory settings: RS232 factory settings are as follows:
Baud rate: 19200 BPS
Data bit: 8 bit
Check bit: None
Stop bit: 1 bit
Data flow control: None
Set * Bluetooth parameters: please refer to the AT instruction set